Recoil Technologies 10mm Bolt Carrier Group
An AR-15 bolt carrier group is a piece of a firearm that houses many key parts such as the firing pin, gas key, cam pin, extractor, and bolt. With all these pieces working together, the BCG can grab and feed another round out of the detachable magazine chamber. During the extraction of a cartridge, the BCG works to absorb the force of the explosion by expanding gas in the carrier. Throughout this process, gas is tapped off from the barrel and sent into the cup inside of the gas key which creates an inertial force that sends the Bolt Carrier Group back into the buffer tube. This entire process helps to reduce recoil.
Recoil Technologies AR-15 M4 Charging Handle Mil-Spec Quality
This AR-15 M4 Charging Handle is machined from 7075 T6 aluminum and has a Type III hard coat anodized finish. This means that this is one strong, durable, and reliable charging handle. The Teflon coating on the handle makes it resistant to corrosion and waterproof. The complete assembly includes the latch. This charging handle is small but mighty.
Recoil Technologies Mil-Spec Lower Parts Kit
Recoil Technologies Mil-Spec Lower Parts Kit is a comprehensive set of high-quality components designed for use in building or upgrading AR-15 rifles. This kit includes all the essential parts needed to complete the lower receiver of an AR-15, ensuring optimal performance and reliability.
Omega Mfg. Heavy Duty Pistol Buffer Tube
This Omega Mfg. AR-15 Pistol Buffer Tube is ready to install on your AR-15 pistol build. This buffer tube is machined to strict standards to provide an excellent fit and reliable function. The Omega Mfg. buffer tube is machined from 6061-T6 aluminum and given a hard coat anodized finish to withstand years of abuse. The outside diameter of 1.248" is sized for SB Tactical Braces. Fabricated to be a superb product for pretty much anybody, we're sure you'll love the Omega Mfg. Pistol Buffer Tube.
Recoil Technologies AR-15 Carbine Castle Nut
Fits both Commercial and Mil-Spec tubes. It's always good to have a spare!
Recoil Technologies AR-15 Carbine Recoil Spring
Made of the finest spring steel rated for 20,000+ rounds
KAK Industry AR-15 9mm Carbine Buffer
This 9mm buffer is designed to be used on new or converted AR-15 shooting 9mm. Depending on a number of factors including barrel length, a heavier buffer may work much better than the standard 3 oz buffer. It is also used to reduce cycle rate of the AR-15 and felt recoil. This is a 5.4 ounce filled buffer to facilitate correct timing, cycling and firing of 9 mm and 9 mm +P loaded ammunition.
US Tactical Mil-Spec Receiver End Plate
Maintains Proper Alignment of Stock & Buffer Tube
+Recoil Technologies 10mm Bolt Carrier Group
+Recoil Technologies AR-15 M4 Charging Handle Mil-Spec Quality
+Recoil Technologies Mil-Spec Lower Parts Kit
+Omega Mfg. Heavy Duty Pistol Buffer Tube
+Recoil Technologies AR-15 Carbine Castle Nut
+Recoil Technologies AR-15 Carbine Recoil Spring
+KAK Industry AR-15 9mm Carbine Buffer
+US Tactical Mil-Spec Receiver End Plate