Trigger Upgrade Kit:
+ Davidson Defense Wraith 3.5lb AR-15 Trigger
+ KAK AR-15 "Lite" Lower Parts Kit
+ Anti-Walk Pins
Davidson Defense Wraith 3.5lb AR-15 Trigger
Builders and shooters know that the best upgrade you can do to your AR-15 is getting a reliable, smooth and light pull trigger. Thanks to the modularity of the AR-15 platform, upgrading your standard Mil-Spec Trigger with a self-contained all-in-one drop-in trigger is as easy as punching out two pins from your lower receiver and "dropping in" your new upgrade. Multiple AR-15 / LR-308 triggers come in many different pull weights. The standard pull weight on a Mil-Spec trigger is around 6 to 8.5 lbs. With a trigger upgrade, you can shave around 4 to 6 lbs off your trigger pull, making it lighter while getting a more tactile and positive reset. The options are endless when it comes to trigger upgrades so find the one that works best for you!
Pull Weight: This trigger has a pull weight of 3.5 lbs
Compatibility: This trigger will work with any standard AR-15 lower receiver.
Anti-Walk Pins: Recommended - This trigger is recommended for use with anti-walk pins to ensure proper placement and alignment during operation.
Trigger Style: Flat - This trigger uses a flat-facing trigger shoe for a lighter more tactile pull, with the added benefit of feeling a more positive reset.
Smooth, crisp break
Straight, flat trigger blade for increased leverage
Elementary installation â€” simple and fast with no set screws to tighten
Single-stage, 3.5-lb. pull
interior parts are S7 tool steel with heavy-hit hardening then black nitride finished for enhanced strength and corrosion resistance
Contained in an anodized housing thatâ€™s machined from a solid block of 6061 aluminum, which is more durable and longer-lasting than punch-tin housings to help the trigger perform flawlessly under a variety of conditions
Precision machined with handcrafted fine-tuning
Sleek appearance to accompany its enhanced performance
Fits AR-style platforms built to mil-spec dimensions â€” calibers include .223/5.56, .308, 6.5, 9MM, and more
KAK AR-15 "Lite" Lower Parts Kit
General Info: Lower Parts Kits include all of the small bits & pieces needed to make your AR-15 Lower fully functional. Such as the mag release, take-down pins, selector, trigger guard, bolt catch, buffer retainer, roll-pins, detents, and small springs are included to allow completion. This KAK Lower Parts Kit contains all of the necessary pieces needed to complete your build EXCEPT the trigger and components that go along with them. You can find triggers & fire control groups (HERE [https://www.MMCarmory.com/gun-triggers.html])
Brand: The 'Lite' Lower Parts Kit is produced by KAK Industries [https://www.MMCarmory.com/kak-industries-ar-products.html] with high-quality steel & brass components.
Brand Info: KAK Industry was founded and incorporated in 2011 by Kurt Kosman to address a gap in the firearms market for quality, American-Made components at affordable, sustainable prices. KAK began in one small shop, supplying specialty firearms components with innovative designs to shooters and hunters across America. Almost immediately, the demand for these products grew to such that a dedicated manufacturing facility was opened in Southern California, a major aerospace manufacturing hub.
Platform: Commercial AR-15
FCG Included: The 'Lite' Lower Parts Kit does NOT come with a hammer, hammer spring, trigger, trigger spring, disconnector, disconnector spring, or hammer & trigger pins. This kit is for completing your AR-15 lower and allowing an affordable parts kit in the case you already have drop-in triggers on-hand and ready to install.
Weight: The overall weight of the 'Lite' Lower Parts Kit is 0.335lbs.
Recoil Technologies anti-walk pins are great for drop-in triggers; they replace the original hammer and trigger pins and are retained by special retaining for a positive lock. One side is flared and broached, and the other side is threaded for a screw. Fits small pin lowers (.154").
Made of blackened chrome vanadium tool steel, nitrided
Allen wrench is 1/16th
These are some of the best anti-walk pins on the market.
Retained in the gun, so dirt will not cause a stoppage
The metal is hard, so there will never be any bending or warping.
Great for drop-in triggers and Mil-Spec triggers.
Works with both forged and billet uppers
The competition's pins will not work with billet uppers, but ours do.
This is not anti-rotate; it is anti-walk. That means the pins will not fall out.
One blackened finish stainless steel screw
Pins are .154" in diameter, and 1.05" long
These pins replace the original hammer and trigger pins.
To view the most up-to-date shipping times Click HERE. To view Warranty, Returns, Terms & Restrictions Click HERE.