Precision Upgrade Kits:
+ James Madison Tactical Saber Evo Drop-In Single Stage Trigger
+ KAK AR-15 Compensator
+ Armaspec Recoil Reduction Buffer
James Madison Tactical Saber Evo Drop-In Single Stage Trigger, Blue Housing, Curved Bow, Includes Anti Rotation Pins
General Info: Builders and shooters know that the best upgrade you can do to your AR-15 is getting a reliable, smooth and light pull trigger. Thanks to the modularity of the AR-15 platform, upgrading your standard Mil-Spec Trigger with a self-contained all-in-one drop-in trigger is as easy as punching out two pins from your lower receiver and "dropping in" your new upgrade. Multiple AR-15 / LR-308 triggers come in many different pull weights. The standard pull weight on a Mil-Spec trigger is around 6 to 8.5 lbs. With a trigger upgrade, you can shave around 4 to 6 lbs off your trigger pull, making it lighter while getting a more tactile and positive reset. The options are endless when it comes to trigger upgrades so find the one that works best for you!
About this Trigger: James Madison Tactical Saber Single Stage Drop-in Trigger has a single-stage, 3.5- 4.0 lb. pull weight. This AR-15 & LR-308 compatible trigger has an anti-walk pin kit included along with adjustable set screws. The skeletonized trigger shoes and blue accents add a subtle flare to any build and if you look closer there is a laser engraved saber head on it as well. This drop in trigger is easy to install and it is made in the USA.
Pull Weight: This trigger has a Single-stage, 3.5- 4.0 lb. pull weight
Compatability: This trigger will work with any standard AR-15 and LR-308 lower receiver.
Anti-Walk Pins: Included - This trigger comes with a set of provided anti-walk pins to ensure the hammer and trigger do not slip from alignment during operation.
Color: This trigger is Blue accented.
Trigger Style: Skeletonized - This trigger has a skeletonized curved trigger shoe to lighten the pulled mass, making the trigger pull smoother, and a morre comfortable engagement surface.
KAK Compensator 5.56/.223 1/2x28
There are three main types of muzzle devices for your weapon: flash suppressors/flash hiders, muzzle brakes, and compensators. AR-15's are getting more and more popular every day, partially due to their low recoil and muzzle rise. But with a good muzzle brake, recoil can be reduced even more. With a good compensator, muzzle rise significantly drops, almost vanishing. And while muzzle flash cannot be completely eliminated, it can be significantly reduced with a quality flash hider. These muzzle devices are growing increasingly more popular due to how easy they are to put on, 5-10 minutes with the right tool, because of their incredible efficiency, and because they make a cool looking gun.
About This Muzzle Device: Compensators - A compensator lowers the rise of your weapon upon the firing of your gun, allowing you to return to the target quicker. It has holes or slots, also known as ports cut only into the upper half of the device, which helps the escaping gases force the muzzle to stay down instead of moving upward. A high-quality compensator helps the shooter stay on target, or return to it faster.
Threading: 1/2x28 Is a common thread type for muzzle devices made for .22 caliber projectiles, commonly found on AR-15 barrels chambered in .223 Wylde, 5.56 NATO, and including .224 Valkyrie.
Finish: Manganese Phosphate - Manganese Phosphate finishes are used on barrels to protect against corrosion and wear. Manganese Phosphate finish is considered for its toughness, and is used in multiple different applications such as aerospace, ordnance, and other firearms-related parts.
Armaspec Recoil Reduction Buffer
The 4.7oz H2 Stealth Recoil Spring SRS is a self-contained multi-stage drop-in replacement for your standard buffer and spring. The SRS is designed to keep the buffer spring from rubbing against the inner wall of the buffer tube providing smooth, quiet operation and the second stage helps reduce the felt recoil significantly.
Drop-in replacement for standard buffer and spring
Reduce felt recoil
Keep the buffer spring from rubbing against the inner wall of the buffer tube
Buffer mass is designed to stay under constant tension against the bolt carrier
Rubber O-ring on the head of the buffer mass prevents metal on metal contact
Made in the U.S.A.
To view the most up-to-date shipping times Click HERE. To view Warranty, Returns, Terms & Restrictions Click HERE.