The Strike Industries Ultralight Multi-Function End Plate and Anti-Rotation Castle Nut are designed to update and upgrade the often neglected castle nut and endplate system. Now available in an ultralight 7075-T6 aluminum version. While the traditional endplate and castle nut works extremely well in retaining your receiver extension, the peening of the castle nut is not conducive to rebuilding or upgrading. With the vast amount of aftermarket support for the AR system today, SI feels that there's a need for a secure system as adaptive as you are. Enter the MFEP and ACN. The SI MFEP and ACN offers a built-in anti-rotation QD socket and sling loops. The MFEP is reversible to orientate sling loops to desired side. The Anti-Rotation Castle Nut (ACN) is specifically designed to work with the Multi-Function End Plate (MFEP). Instead of peening the endplate to secure the castle nut, a set screw fulfills this function to allow for multiple uses as you upgrade or update your build. Also never worry about finding a flying takedown pin detent and spring again as there is an included set screw on the MFEP for ease of installation or removal.
Compatible with Mil-Spec AR-15 and AR-10 ArmaLite/DPMS pattern upper receivers.
Anodized areas that touch between end plate and castle nut will have expected minor scratches from torqueing of castle nut.
End plate set screw to retain takedown pin detent and spring for ease of installation or removal
Multi-Function End Plate is reversible to orientate sling loops to desired side
No peening or staking needed with the Anti-Rotation Castle Nut and Multi-Function End Plate design
Anti-rotation QD socket
Multiple sling loop attachment points
Ultralight anodized 7075-T6 aluminum construction
x1 Multi-function end plate
x1 Anti-rotation castle nut
x1 Set screw for anti-rotation
x1 Set screw for detent and spring
x1 Loctite Threadlocker Blue 242
Weight: 1.0 oz
Weight w/ Package: 1.2 oz