MMC Combos DIY Pistol Kits Featuring: G19 Polymer80 Slide
+ ELD Performance Non-Threaded 9mm Barrel
+ Slide Parts Completion Kit
+ SPSR Trigger
G19 Polymer80 Slide
Polymer80 G19 Gen3 Standard Slide, DLC Black. This Glock 19 compatible slide by Polymer80 is made of 17-4 PH stainless steel that has been heat treated to 42-43 HRC. The slide features a black Diamond-Like Carbon PVD finish. Aggressive serrations can be found on the front and rear to allow effective manipulation. The clean modern lines and heavy front chamfer gives this a subtle but aesthetic profile. This is compatible with the Glock G19 Gen3 platform as well as Polymer80 PF940C pistol builds. Manufactured in the USA, Polymer80 offers a limited lifetime warranty on the slide and a 2-year warranty on the coating (does not include scratches or wear from normal use). Please note that this is for the Slide only and does NOT include any internal parts, barrel, recoil spring assembly, or sights.
SPECIFICATIONS:
Brand: Polymer80
Caliber: 9mm
Finish / Color: Black
Firearm Type: Pistol
Material: Steel
Models Fit: G19
ELD Performance Non-Threaded 9mm Barrel
Introducing the ELD Performance Glock 19 Compatible Nitride Barrel.
This barrel is a drop-in fit to the factory Glock 19 barrel. Compatible with Gen 1-4.
SPECIFICATIONS:
Sku: B9MM-NTGL-93019
Manufacturer: ELD Performance
Country of Origin: U.S.A
Caliber: 9mm
Barrel Twist: 1-16
Style/Profile: Glock 19 Compatible
Finish: Nitride
Material: 410 SS CHF
Slide Parts Completion Kit
The TF Tactical Glock 19 Compatible Slide Parts Completion Kit comes with all the components you need to complete your slide. These replacement parts are manufactured to the exact same specifications and tolerances and use the same manufacturing materials as the original Glock parts. All the polymer components come in black. Complete your build today with the TF Tactical Glock 19 Slide Completion Parts Kit.
Compatible with:
Glock 19
Gen 1-3
INCLUDES:
Firing Pin Spring Cups
Spring Loaded Bearing
Slide Cover Plate
Firing Pin Safety with Spring
Firing Pin Spring
Extractor Depressor Plunger
Guide Rod and Recoil Spring Assembly
Extractor with Loaded Chamber Indicator
Extractor Depress Plunger Spring
Firing Pin Spacer Sleever
Firing Pin Channel Liner
Firing Pin
SPSR Trigger
There are a few key points that all shooters look for in a striker fire pistol trigger: speed, accuracy, consistency, and reliability. The Lightning Tap "SPSR" by TF Tactical checks all of the boxes.
The Lighting Tap "SPSR" (Short Pull Short Reset) Glock Compatible Trigger by TF Tactical is one of the crispest triggers on the market for any firearm. This trigger is proudly made in the USA. The trigger shoe is machined from 7075 aircraft-grade aluminum. The Short Pull Short Reset does exactly what the name says, the trigger offers a pull and an even shorter reset. One of the most common complaints about striker fire pistols is the "long creep" to get the trigger to break, the SPSR eliminates that completely.
The SPSR is made with TF Tactical signature flat-faced "Hook" trigger. This design brings in all of the advantages of a flat-faced trigger design, but the hook at the end gives a reference as to where the finger is on the trigger. This enables the shooter to not have to pay attention to finger placement on the trigger as the ergonomics of this trigger have made correct finger placement on the trigger so natural it happens automatically. This design is not only ideal for the initial trigger pull but makes correct trigger finger placement for repeat shots natural and effortless. This allows the shooter to either stay on target or acquire new targets with less effort and with greater speed. Even with an amazing trigger design, keep in mind that target acquisition and breath control are still the shooters' responsibility.
The trigger pull weight is approximately 3.5-4 LBS (results vary slightly depending on model and configuration of other parts). The reset for the SPSR 3.5-4mm
This SPSR version is compatible with Glock Gen 1-3 and works with both 17 and 19 platforms (9mm only), and also is compatible with 80% and aftermarket frames like Polymer80 and Lone Wolf.
FEATURES:
Hybrid Flat/Curved "Hook" Design
Reduced Trigger Creep
4 LBS initial trigger pull
3.5 LBS reset trigger pull
Reduced Reset Distance(3.5-4mm)
Trigger Shoe Machined from Solid 7075 Aircraft Aluminum
OEM Trigger Bar Included (Red)
Compatible with Glock 9mm 17 & 19 frames Gen. 1-3
Please note: If the listing says "In-Stock" it means we have the item(s) in stock. Please check this LINK to view our most up to date shipping status.
Warranty, Returns & Terms: MMC Armory offers a 30 day return, refund and exchange policy. You must email or call MMC Armory and obtain an RMA number prior to any return, refund, or exchange. All returns must include the original order number, receipt or invoice, along with the customers billing address, shipping address, contact phone numbers, contact emails, and RMA number. Returns, refunds, and exchanges may take up to two weeks, not including transit times, for processing after we have received return product. Return shipping costs will be the responsibility of the returning party, with the exception of the wrong item being received or on warranty exchange during the first 30 days after delivery. Items returned for warranty will only be replaced or exchanged, no refund given on warranty items. 
