Barrel Bundle: Mean Arm's Endomag 9mm 30 Round Pmag Conversion Kit + ELD Performance AR-15 4.5" OAL 9MM, Medium Profile, 1:10T, 4150 CrMoV, 1/2x36, Nitride Barrel + Magpul PMAG 30 AR/M4 Gen M2 MOE 5.56x45mm NATO (No Window)

Don't, have a 9mm AR-15 lower receiver? You don't need one! Convert your Magpul PMAG into a 9mm compatible magazine and pair it with your favorite 9mm AR-15 upper receivers!

About this Conversion Kit: This product is a magazine insert that converts your Gen 2 or Gen 3 5.56/.223 PMAG housing into a 9mm magazine to use with a standard AR lower and 9mm upper of your choosing with a Glock or Colt variant 9mm BCG.

Type: Magazine Conversion - Replace the internals of your standard PMAG with the conversion kit and feed 9mm rounds with ease!

Install: Disconnect the baseplate from your PMAG and remove the spring and follower inside, install the Endomag conversion kit into the magazine body, and reinstall the baseplate.

FEATURES:

No modifications to your 5.56x45 lower! Changing calibers is now simply a complete 9mm upper for your AR platform. No nuts, no bolts, no drilling, no bull.

Last round bolt-hold open feature, just as an AR15 should function.

Built-in ejector designed to perform under intense conditions.

Convert your 5.56x45 PMAG? to 9mm in seconds, and easily convert back to 5.56 without damaging your PMAG. No permanent changes to anything!

Specially formulated polymer.

General Barrel Info: The barrel on a pistol operates through a 'gas impingement' system, where gas is tapped from off the barrel and cycled back through a connected gas system to help the bolt carrier extract a spent cartridge. Pistol length barrels come in two gas lengths, Pistol, Carbine, & Mid-Length. Pistol barrels can be chambered in a variety of different calibers from rifle to pistol cartridges. Thanks to the modularity of the platform, your next pistol will be incredibly easy.

Brand Info: The Engineers at ELD Performance have created a line of high-quality barrels precision machined for reliability and accuracy at an affordable price! ELD Performance barrels are made in a variety of calibers with the reliability to rival the best.

About This Barrel: This high-strength barrel is 4.5-inches long and chambered for 9MM. It has a medium profile with a 1:10 twist rate. It is made from high-strength 4150 CMV with a black, nitride finish that keeps it resistant to corrosion. This barrel has been designed to be reliable and accurate on even the craziest of adventures.

About the Profile: Medium - Medium Profile barrels are designed to have an even weight distributed from the beginning to the end of the barrel, this results in a rather tubular-looking appearance but with identical rigidity and properties to a government profile barrel.

Barrel Classification: Pistol

Length: This Barrel is designated as a pistol length barrel with an overall length of 4.5".

Caliber: 9mm - This barrel is chambered in 9mm, perfect for light recoiling pistol caliber carbines or rifles. 9mm is the most popular pistol cartridge in North America.

Material: 4150 CrMoV - Chrome-Moly Vanadium, or simply "CMV", is the official mil-spec gun steel developed by Colt Firearms for the military-issued M16 and M4. It contains the same elements as 4150 steel. It also contains Vanadium. Vanadium significantly increases the strength, hardness, and high-temperature stability of steel.

Finish: Nitride - Nitriding is a process during manufacturing that diffuses nitrogen into the steel to make a case-hardened surface for improved resistance and strength. A Nitrided barrel typically has a gloss black texture.

Thread Pitch: 1/2x36 - Commonly found on barrels threaded for 9mm, this will allow for 9mm muzzle devices on your AR-15 platform.

About this Magazine: Magpul has designed an affordable and reliable magazine known as the PMAG or Polymer-Mag. Designed from the ground up to be STANAG compliant, the PMAG was crafted using a polymer as the base for the body, reducing the weight of the magazine and still having strength and durability on par with steel or aluminum magazines. PMAGs are STANAG compliant and can reliably feed 5.56x45 NATO, .223 Remington, and .300 Blackout.

Construction: The main body of Magpul PMAGs uses a synthetic polymer that reduces weight while maintaining rigidity and structural integrity.

Feed-Lips: Polymer - The feed-lips on this magazine are uniform with the material of the body.

Capacity: This magazine has a standard capacity of 30 rounds.

Follower: The PMAG Gen M2 MOE Magazine uses a non binding, high visibility black follower. Providing excellent feeding and loading.