Spike's Tactical PHU Skull Rifle Lower Build Kit, Magpul FDE DT Carbine Stock

Spike's Tactical PHU Skull Rifle Lower Build Kit, Magpul FDE DT Carbine Stock

This is a Spike's Tactical Pipe Hitters Union Skull AR-15 rifle lower build kit built around a Spike's Tactical STLS023 PHU Skull forged 7075-T6 aluminum lower receiver with a MIL-A-8625F Type III Class 2 hard coat anodized black finish, a low shelf trigger pocket with RDIAS compatibility, Spike's Tactical Apopka FL USA roll mark, a Pipe Hitters Union Skull logo with crossbones and MOD PHU CAL MULTI engraving on the magazine well, and ambidextrous Safe and Fire pictogram style selector markings. The complete Mil-Spec AR-15 lower parts kit covers the full internal lower component group with a Mil-Spec single-stage trigger, Mil-Spec safety selector, standard Mil-Spec magazine catch, bolt catch, pivot pin, and takedown pins. An A2 style black textured polymer pistol grip covers the grip interface. The buffer system consists of a Mil-Spec heavy-duty AR-15 6-position carbine buffer tube in black anodized aluminum, a standard carbine buffer at 3 oz., and a standard AR-15 carbine recoil spring made in the USA. A US Tactical AR-15 and M16 Mil-Spec steel receiver end plate in black and an AR-15 Mil-Spec carbine steel castle nut in black complete the rear hardware. A Magpul DT carbine stock in FDE reinforced polymer, made in the USA, with an adjustable length of pull, a dual tension auto-engaging friction lock, a single ambidextrous adjustment lever, a sloping cheek weld profile, a non-slip rubber buttpad with optimized curvature, a rotation-limiting integral QD sling socket, and a rear 1.25-inch sling loop closes out the rear end.

Key Features

• Spike's Tactical STLS023 PHU Skull forged 7075-T6 aluminum lower receiver, MIL-A-8625F Type III Class 2 hard coat anodized black
• Low shelf trigger pocket, RDIAS compatible
• Pipe Hitters Union Skull logo with crossbones and MOD PHU CAL MULTI engraving on magazine well
• Ambidextrous Safe and Fire pictogram style selector markings
• Spike's Tactical Apopka FL USA roll mark
• Compatible with 5.56 NATO, .223 Remington, .300 AAC Blackout, 9mm, and other AR-15 compatible calibers
• Complete Mil-Spec AR-15 lower parts kit with Mil-Spec single-stage trigger, Mil-Spec safety selector, standard Mil-Spec magazine catch, bolt catch, pivot pin, and takedown pins
• A2 style black textured polymer pistol grip
• Mil-Spec heavy-duty AR-15 6-position carbine buffer tube, aluminum, black anodized
• Standard carbine buffer, 3 oz.
• Standard AR-15 carbine recoil spring, made in the USA
• US Tactical AR-15 and M16 Mil-Spec steel receiver end plate, black
• AR-15 Mil-Spec carbine steel castle nut, black
• Magpul DT carbine stock, FDE, reinforced polymer, made in the USA, adjustable, dual tension auto-engaging friction lock, single ambidextrous adjustment lever, sloping cheek weld profile, non-slip rubber buttpad with optimized curvature, rotation-limiting integral QD sling socket, rear 1.25-inch sling loop, Mil-Spec carbine buffer tube compatible

Perfect For

• AR-15 rifle builders sourcing a complete lower build kit on the Spike's Tactical PHU Skull receiver with a Magpul FDE DT carbine stock included
• Shooters pairing this kit with an existing upper assembly who want the PHU Skull lower receiver with a complete Mil-Spec lower parts kit and a Magpul DT stock with a dual tension friction lock and dual sling attachment options covered in one package
• Builders who want a distinctively marked black Spike's Tactical PHU Skull lower receiver paired with a Magpul FDE DT carbine stock for a two-tone black and FDE exterior on the lower side

Lower Receiver

The Spike's Tactical STLS023 PHU Skull lower receiver is precision forged from 7075-T6 aluminum and finished to MIL-A-8625F Type III Class 2 hard coat anodize standards in black. The low shelf trigger pocket is RDIAS compatible. The magazine well carries the Pipe Hitters Union Skull logo with crossbones and a MOD PHU CAL MULTI engraving, and the ambidextrous Safe and Fire pictogram style selector markings appear on both sides of the receiver. The Spike's Tactical Apopka FL USA roll mark is present on the receiver body. The receiver accepts standard Mil-Spec AR-15 components and is compatible with 5.56 NATO, .223 Remington, .300 AAC Blackout, 9mm, and other AR-15 compatible calibers.

Lower Parts Kit and Buffer System

The complete Mil-Spec AR-15 lower parts kit covers the full internal lower component group, including the Mil-Spec single-stage trigger, Mil-Spec safety selector, standard Mil-Spec magazine catch, bolt catch, pivot pin, and takedown pins. An A2 style black textured polymer pistol grip covers the grip interface. The Mil-Spec heavy-duty AR-15 6-position carbine buffer tube in black anodized aluminum, standard carbine buffer at 3 oz., and standard AR-15 carbine recoil spring made in the USA form the complete buffer system at the rear of the lower. The US Tactical AR-15 and M16 Mil-Spec steel receiver end plate in black and AR-15 Mil-Spec carbine steel castle nut in black lock the buffer tube down cleanly at the rear of the receiver. The Magpul DT carbine stock in FDE reinforced polymer, made in the USA, fits directly onto the Mil-Spec carbine buffer tube and closes out the rear end with an adjustable length of pull secured by a dual tension auto-engaging friction lock controlled by a single ambidextrous adjustment lever, a sloping cheek weld profile, a non-slip rubber buttpad with optimized curvature for comfortable shoulder contact, a rotation-limiting integral QD sling socket, and a rear 1.25-inch sling loop that together give the builder two sling attachment options built directly into the stock body. The FDE color of the Magpul DT stock contrasts against the black anodized lower receiver, giving the lower build a two-tone black and FDE exterior from receiver to stock.

Follow safe handling and manufacturer instructions. Ensure compliance with all applicable federal, state, and local laws.