Davidson Defense Suppressor Ready Lattice 16-inch Carbine-Gas 1:3 8.6 BLK AR-10 Freefloat M-Lok Handguard Rifle Full Build Kit

Suppressor Ready Lattice 16-inch 8.6 Blackout AR-10 Full Build Kit

The Lattice is a Full Build Kit built around a 16-inch BC-10 barrel chambered in 8.6 Blackout, with a SOCOM profile finished in Parkerized. It's paired with an AR-10 high-profile upper receiver finished in black anodizing. It pairs a 15-inch Crest Series high-profile LR-308 free-float M-LOK handguard with a threaded M18x1.5 muzzle left bare, giving this build a Suppressor Ready configuration since no muzzle device is installed on that threading. It runs on a carbine-length gas system. A Recoil Technologies LR-308 bolt carrier group, rated for 8.6 Blackout, an LR-308 aluminum charging handle, Recoil Technologies Mil-Spec quality .308 Lower Parts Kit, carbine buffer-system components, and a black SOPMOD-style collapsible stock round out the rest of the rifle. The lower receiver is not included, leaving the buyer to select and supply that component separately.

Key Features

• BC-10 16-inch 8.6 Blackout barrel, 1:3 twist, SOCOM profile
• Carbine-length gas system with adjustable low-profile gas block
• AR-10 high-profile upper receiver, black anodized finish
• Crest Series 15-inch high-profile LR-308 free-float M-LOK handguard
• M18x1.5 threaded muzzle, Suppressor Ready; no muzzle device included
• Recoil Technologies LR-308 bolt carrier group, nitride finish, 8.6 Blackout rated
• Black SOPMOD-style collapsible stock with integrated storage compartments and QD sling mounts
• Recoil Technologies Mil-Spec quality .308 Lower Parts Kit and carbine buffer-system components included
• Lower receiver is not included.

Barrel and Gas System

The BC-10 barrel runs 16 inches long, chambered in 8.6 Blackout and finished in Parkerized with a SOCOM profile. It carries a 1:3 twist rate, suited to stabilizing the heavy-for-caliber projectiles this chambering runs, along with an M18x1.5 muzzle thread. Gas cycles back to the action through a carbine-length system, running a stainless steel carbine-length gas tube and a standard low-profile adjustable gas block machined from steel with a Melonite finish, sized to an .875-inch journal.

Upper Receiver and Handguard

The upper receiver is an AR-10 high-profile unit finished in black anodizing, fitted with an AR-15 forward assist assembly and an LR-308 ejection port door assembly. Over the barrel sits a 15-inch Crest Series high-profile LR-308 handguard, a free-float design finished in black, using an M-LOK attachment system along its length.

Suppressor Ready

The barrel is threaded M18x1.5 at the muzzle, but no muzzle device is installed on that threading, which is what makes this build Suppressor Ready. The bare threaded muzzle leaves that end open for the buyer's own suppressor mounting solution.

Bolt Carrier Group and Charging Handle

A Recoil Technologies LR-308 bolt carrier group is included, finished in nitride and rated for 8.6 Blackout to match the chambering of this build. An LR-308 aluminum charging handle rounds out the upper's operating components.

Lower Parts Kit and Buffer System

A Recoil Technologies Mil-Spec quality .308 Lower Parts Kit covers the fire-control and lower-control internals needed once a lower receiver is on hand. Behind it sits a Mil-Spec heavy-duty six-position carbine buffer tube, holding an LR-308 collapsible stock buffer weighing 3.76 ounces and an AR-10 carbine extra-power buffer spring made from 17-7 stainless steel. A standard AR-15 carbine castle nut and Mil-Spec AR-15/M16 receiver end plate secure the buffer tube assembly to the lower.

Stock

Capping off the rifle is a black SOPMOD-style collapsible stock. It includes built-in storage compartments for small parts or batteries, along with integrated QD sling mounts for attaching a sling without extra hardware. It slides onto the six-position buffer tube included with this kit, giving the shooter adjustable length-of-pull for the final piece of the build.

Follow all manufacturer instructions and safe handling practices.

Ensure compliance with all applicable federal, state, and local laws.

Verify suppressor and mounting-system compatibility before use.

Lower receiver is not included.