AR-15 5.56 NATO FDE PVD M16 BCG, Mil-Spec Charging Handle & Assembled Upper Receiver Bundle

AR-15 5.56 NATO FDE PVD M16 BCG, Mil-Spec Charging Handle & Assembled Upper Receiver Bundle

This bundle pairs a complete AR-15/M16 bolt carrier group finished in FDE PVD, a standard Mil-Spec AR-15 charging handle, and an assembled AR-15 upper receiver finished in black, giving the buyer the core operating components needed for an AR-15 upper build, chambered for 5.56 NATO and .223 Remington.

Key Features

• Assembled AR-15 upper receiver, black finish, installed dust cover and forward assist
• Complete AR-15/M16 bolt carrier group, M16 auto profile, FDE PVD finish throughout
• Mil-Spec AR-15 charging handle, A2-style latch, black anodized
• 8620 steel carrier, chrome-lined interior for smooth cycling
• 9310 steel bolt, heat treated, precision ground, shot peened, and MPI inspected

Upper Receiver

The upper receiver is an assembled AR-15 unit finished in black, built to accept standard AR-15 components throughout. The dust cover and forward assist both come installed on the receiver, giving the buyer a ready-to-build foundation for the rest of the upper.

Bolt Carrier Group

The carrier is machined from aircraft/bearing-quality 8620 steel in an M16 auto profile, finished in FDE PVD and fitted with a chrome-lined interior to help the bolt cycle smoothly inside the carrier body over repeated use. The bolt itself is machined from 9310 steel and finished to match in FDE PVD, carried through a full battery of processing: heat treating for strength, precision grinding for tight tolerances, shot peening to relieve surface stress, and Magnetic Particle Inspection to check for material flaws before it ships. The firing pin is machined from 8740 steel and finished in chrome plating for a smooth, corrosion-resistant strike surface. The extractor is a one-piece billet unit, fully machined as an enhanced design and finished in phosphate coating, while the ejector and extractor retaining pin are both machined from S7 tool steel for durability under repeated cycling. The cam pin carries a PVD coating to match the finish carried across the rest of the group.

Gas Key

The gas key is machined from 4130 steel and finished in PVD to match the carrier and bolt. It's installed using a precision hydraulic staking process, a method that properly deforms the screw heads into the carrier body to keep the key seated under pressure, and it's secured with KAK T25 drive Grade 8 screws that have themselves been properly heat treated for added holding strength.

Charging Handle

The charging handle included in this bundle is a standard Mil-Spec AR-15 unit with an A2-style latch, finished in black anodizing. It's a non-ambidextrous design, operable from the right side in the traditional AR-15 configuration.

Follow all manufacturer instructions and safe handling practices.

Ensure compliance with all applicable federal, state, and local laws.